- The case will be taken over between the two sidebelts and transit the case through the machine

- The belts have a special profile, which keep the case under control during the transit of the case

- The front flap will first be pre-folded by the short flap folder mechanism before it will be closed. As soon as the back side of the case is located by a photo cell the back flap will be closed

- The flapfolders will fold the long flaps during transport

- Then the case will be sealed on top with tape, the closed case will be transported out of the machine

- The side adjustements from the sidebelts and the height adjustement can be done with hand-wheels

- The adjustements from both flap folders can be changed easily with one handle, the adjustements can easily be read from measure scales

- The tape sealer standard exists of a closing unit on top with tape. In the tape sealer the side belts keep the case perfect under control during taping of the top of the case

- Options : Warning beacon detection out of tape / tape broken; In feed guides (self adjusting); Discharge free detection by photocell; Minimum closed case height of 60mm / 80mm / 100mm; In feed guides with separation module and stopper; Check flap closed correct