American box closer ETCA CS300
GENERAL DESCRIPTION
- The case will be taken over between the two sidebelts and transit the case through the machine
- The belts have a special profile, which keep the case under control during the transit of the case
- The front flap will first be pre-folded by the short flap folder mechanism before it will be closed. As soon as the back side of the case is located by a photo cell the back flap will be closed
- The flapfolders will fold the long flaps during transport
- Then the case will be sealed on top with tape, the closed case will be transported out of the machine
- The side adjustements from the sidebelts and the height adjustement can be done with hand-wheels
- The adjustements from both flap folders can be changed easily with one handle, the adjustements can easily be read from measure scales
- The tape sealer standard exists of a closing unit on top with tape. In the tape sealer the side belts keep the case perfect under control during taping of the top of the case
- Options : Warning beacon detection out of tape / tape broken; In feed guides (self adjusting); Discharge free detection by photocell; Minimum closed case height of 60mm / 80mm / 100mm; In feed guides with separation module and stopper; Check flap closed correct
TECHNICAL DATA
- Tape check out of tape / tape broken
- Transit control; when case crashes the machine will stop (time control)
- Control minimum distance between cases 350 mm
( when cases enter the machine against each other this functionality will not operate)
- Machine dimensions: 2660 x 975 x 1800 mm
104.72" x 38.39" x 70.87
- Pneumatic supply : 6 bars
- Mini/maxi cases dimensions:
- Length: 200 - 650 mm / 7.87 " - 25.59 "
- Width: 120 - 510 mm / 4,72 " - 20,08 "
- Height: 120 - 600 mm / 4,72 " - 23,62 "
UP TO 30 CASES/MIN
COMPACT & ERGONOMIC
Additional information
In the same range
Related products
-
Tray packers ETC B33
- Case forming, End of line, Tray packers
- Tray packers
- Up to 33 trays/min
- Discover
Machine speed Final packaging Your product -
American box formers ETC CA20
- American box formers, Case forming, End of line
- Up to 25 cases/min
- Carton packing of American cases by hot-melt gluing or by adhesive
- Intermittent motion
- Discover
Machine speed Final packaging Your product -
American box closer ETCA CS1000
- American box closers, Case forming, End of line
- Up to 30 cases/min
- American box closer by hot-melt gluing
- Intermittent motion
- Discover
Machine speed Final packaging Your product